User's Manual

Visteon Confidential
../ULCR Users Manual v0.9.doc Pg 6 of 13
PAIR A BT DEVICE (by having the AHU search for devices)
1. BT Audio source selected
2. Press [MENU] multiple times until ADD DEVICE is displayed
3. Press [►║OK] to Add Device – FIND FORD BT will be displayed
4. Press [▼] or [▲] – FIND DEVICES will be displayed
5. Press [►║OK] – SEARCHING followed by ‘xx’ DEVICES will be displayed.
The AHU will search for 20 seconds, or until a maximum of ‘xx’ = 10 devices have been identified.
The BT name of the first device in the list will be displayed.
6. Press [▼] or [▲] until the BT name of the desired device is displayed.
7. Press [►║OK] – ENTER PIN followed by a 6 digit PIN ‘xxxxxx’ will be displayed
8. Press [►║OK] to initiate pairing to the selected device.
If the Phone does not support SSP (Secure Simple Pairing)
9a. Enter the 6 digit PIN ‘xxxxxx’, which is displayed the AHU, into the Phone
10a. Complete pairing and establish a connection using the Phone – SET PRIMARY will be displayed on the AHU
If the Phone does support SSP
9b. SECURE PIN followed by SSP ‘zzzzzz’ will be displayed
10b. On the Phone, confirm that the AHU generated the same SSP PIN ‘zzzzzz’ as the Phone – SET PRIMARY will be
displayed
11. Press [►║OK] to Set Primary – YES will be displayed
12. Press [►║OK] to confirm this device as the Primary device for future connection establishment
PRIMARY SET followed by LOAD PHONEBK will be displayed
or Press [▼] or [▲] - NO will be displayed. Press [►║OK] to not select the phone as the Primary
13. Press [►║OK] to Download the Phonebook – YES will be displayed
14. Press [►║OK] to confirm that the Phonebook is to be downloaded
DOWNLOADING followed by DOWNLOADED will be displayed
or Press [▼] or [▲
] - NO will be displayed. Press [►║OK] to not download the Phonebook
15. The BT User Friendly Name of the paired device will be displayed
SELECT DEVICE
Select a paired device to which to establish a Bluetooth Connection with the AHU
1. BT Audio source selected
2. Press [MENU] multiple times until SEL DEVICE is displayed
3. Press [►║OK] – the BT User Friendly Name of the first device paired will be displayed
4. Press [▼] or [▲] to cycle through the BT User Friendly Names of the devices (maximum of 5) that have been paired to the AHU
5. Press [►║OK] when the BT User Friendly Name of the desired device is displayed – ACTIVATING followed by the BT User Friendly
Name of the selected device will be displayed
SET PRIMARY
Select a device to be the highest priority (PRIMARY) device when the AHU attempts to automatically connect
1. BT Audio source selected
2. Press [MENU] multiple times until SET PRIMARY is displayed
3. Press [►║OK] – the BT User Friendly Name of the first device paired will be displayed
4. Press [▼] or [▲] to cycle through the BT User Friendly Names of the devices (maximum of 5) that have been paired to the AHU
5. Press [►║OK] when the BT User Friendly Name of the desired device is displayed – PRIMARY SET will be displayed followed by
the BT User Friendly Name of the currently connected device.