User's Manual

Visteon Confidential
../ULCR Users Manual v0.9.doc Pg 10 of 13
CALL HISTORY (only available if a paired device is connected)
Access the Outgoing (last 10), Incoming (last 10) and Missed (last 10) calls registered by the connected phone.
1. Press [PHONE] to place the AHU into Phone Mode
2. Press [MENU] until CALL HISTORY is displayed
3. Press [►║OK] to select Call History – OUTGOING will be displayed
4. Press [▼] or [▲] to cycle through the OUTGOING, INCOMING and MISSED call log categories
5. Press [►║OK] on the desired category – the Contact Name of the 1
st
of up to 10 entries in that category will be displayed
6. Press [▼] or [▲] to cycle through the Contact Names in the selected category
7. Press [►║OK] or [
│◄◄ ] (Seek Down) to dial the selected contact
ADD DEVICE
Pair a device with the AHU. Up to 5 devices that support the HFP and /or A2DP Bluetooth profiles can be paired to the AHU.
PAIR A BT DEVICE (by placing the AHU into Discoverable Mode)
1. Press [PHONE] to place the AHU into Phone Mode
2. Press [MENU] multiple times until ADD DEVICE is displayed
3. Press [►║OK] to Add Device – FIND FORD BT will be displayed
4. Press [►║OK] to Find Ford BT – ENTER PIN followed by a 6 digit PIN ‘xxxxxx’ will be displayed
5. Initiate an Inquiry on the BT Phone to be paired
6. Select FORD AUDIO from the list of devices presented on the Phone
If the Phone does not support SSP (Secure Simple Pairing)
7a. Enter the 6 digit PIN ‘xxxxxx’, which is displayed the AHU, into the Phone
8a. Complete pairing and establish a connection using the Phone – SET PRIMARY will be displayed on the AHU
If the Phone does support SSP
7b. SECURE PIN followed by SSP ‘zzzzzz’ will be displayed
8b. On the Phone, confirm that the AHU generated the same SSP PIN ‘zzzzzz’ as the Phone – SET PRIMARY will be displayed
9. Press [►║OK] to Set Primary – YES will be displayed
10. Press [►║OK] to confirm this device as the Primary device for future connection establishment
PRIMARY SET followed by LOAD PHONEBK will be displayed
or Press [▼] or [▲] - NO will be displayed. Press [►║OK] to not select the phone as the Primary
11. Press [►║OK] to Download the Phonebook – YES will be displayed
12. Press [►║OK] to confirm that the Phonebook is to be downloaded
DOWNLOADING followed by DOWNLOADED will be displayed
or Press [▼] or [▲] - NO will be displayed. Press [►║OK] to not download the Phonebook
13. The BT User Friendly Name of the paired device will be displayed.