Owner`s manual

20
Figure 28: Corner Installation.
Installation
mobiLe home inStaLLation - fReeStanDing
2" (5 cm)
2"
(5 cm)
6"
(15 cm)
Floor Protection
Fresh Air Intake
Wall thimble
manufactured
by pellet vent
manufacturer.
● Secure the heater to the floor using the
two holes in the pedestal�
● Replace the two metal covers after
securing the unit to the floor�
● Ensure the unit is electrically grounded to
the chassis of your home (permanently)�
● Do not install in a room people sleep in�
● Outside fresh air is mandatory� Secure
outside air connections directly to fresh
air intake pipe and secure with three (3)
screws evenly spaced�
CAUTION: THE STRUCTURAL INTEGRITY OF THE MANUFACTURED HOME FLOOR, WALL
AND CEILING/ROOF MUST BE MAINTAINED.
coRneR thRough WaLL inStaLLation - fReeStanDing
Figure 27: Mobile home installation.
VF100
1
/ 4 ” LAG BOLTS
SECURELY FASTENED
GROUND WIRE DIRECTLY
TO METAL CHASSIS
HEARTH PAD
FLOORING
STEEL FRAME