Owner`s manual

14
Removing youR PeLLet Stove fRom the PaLLet
FREESTANDING: To remove your new freestanding stove from its pallet, remove the ash pan, remove
the two metal plugs in the bottom of the pedestal, remove the two (2) wood screws under the plugs�
Also remove the two (2) wood screws on the back of the pedestal� Remove the unit from the pallet,
replace the two metal plugs, and replace the ash pan�
INSERT: To remove your new insert stove from its pallet, remove the two (2) wood screws just inside
the unit� Remove the unit form the pallet and install the pedestal� See “InstallatIon of Pedestal - Insert.”
Installation
METAL PLUGS
WOOD SCREWS
Figure 12: Removing Freestanding from Pallet.
2 SCREWS
Figure 13: Removing Insert from Pallet.
inStaLLation of PeDeStaL - inSeRt
The Fireplace Insert model is supplied with
a pedestal that must to be attached prior to
installation:
1� Remove the unit from the pedestal�
2� Remove the pedestal from the hopper�
3� Place the unit on its back on the pallet�
4� Remove the 4
5
/16” hex head screws from the
bottom of the unit�
5� Secure the pedestal to the unit using the four
screws removed in step 4� See figure 14�
Figure 14: Installing pedestal onto unit.