User manual

VK2-2MPBX User manual V1.2

Network – UPnP

UPnP is enabled by default, and the network camera then is automatically detected by operating

systems and clients that support this protocol.

Figure 56. System / Network – UPnP

UPnP Setting: Click the Enable UPnP checkbox to disable the UPnP. The default setting is

enabling.

Friendly name: Click in the Friendly name box and type a description for the text you are creating

(1 to 32 alphanumeric characters). If your computer is also enabled, the camera is automatically

detected and a new icon is added to “Model Name-MAC address”.

NOTE

UPnP must also be enabled on your Windows XP computer. To do this, open the Control Panel from

the Start Menu and select Add/Rename programs. Select Add/Remove Windows Components and

open the Networking Services section. Click Details and then select UPnP as the service to add.

- Click the Save button to save the settings, or click the Reset button to clear all of the information

you entered without saving it.