User manual

VK2-2MPBX User manual V1.2
88
Network – RTP
These RTP settings concern the IP addresses and port numbers to use for video and audio
stream(s).
Figure 55. System / Network – RTP
Port Range: The RTP Port range defines the range of ports from which the video/audio ports
are automatically selected. This feature is useful if the camera is connected to a NAT router with
manually configured port mapping.
NOTE
Limit the range of ports permitted for RTP unicast/multicast by entering the Start port and End port
in the provided fields.
Start port: The Start port can be entered in the range 1024-65532. The default setting is 5008.
End port: The End port can be entered in the range 1024-65532. The default setting is 50999.
Note