User manual

VK2-2MPBX User manual V1.2
86
Network – DDNS
The DDNS (Dynamic DNS) service can provide the camera with its own URL (web address), which
can then be used to access it over the Internet. Use the DDNS service to assign a host name for
easy access to your network camera.
NOTES
- If the camera has not previously been registered at the Dynamic DNS Service, you need the
registration process first. You will then need to visit http://www.security-device.name to
complete the process.
- If the camera is already registered at the Dynamic DNS Service and its IP address changes, the
DNS service must be updated with this new IP address.
- These regular updates will always occur at the set interval, with no regard to whether automatic
updates have been configured or not.
Figure 54. System / Network – DDNS
Internet DDNS (Dynamic Domain Naming Service): Provides user with host
name to access the camera.
Enable DDNS: Click the Enable DDNS checkbox to active DDNS service.
DDNS server: Enter the DDNS server name. The default DDNS server is security-device.name
Registered host: Enter the registered host name.