User manual

VK2-2MPBX User manual V1.2
82
Date & Time
Use the Date and Time tab to set the camera’s date and time values, manually or automatically.
Figure 52. System / Date & Time
Current Server Time: Shows the current date and time.
Date: The default setting is 1970-01-01.
Time: The default setting is 00:00:00.
New Server Time: Select the time zone where your camera is located.
Click the Automatically adjust for daylight saving changes checkbox to automatically update the
time changes caused by daylight saving.
Time zone: The default setting is GMT.
Time mode: The default setting is Set manually.
Synchronize with computer time: Sets the time according to the clock on your computer.