User manual

VK2-2MPBX User manual V1.2
74
RS485
Use the RS485 tab to set RS485 parameters for external PTZ device.
RS485 is the most versatile communication standard in the standard series defined by the EIA. That
is why RS485 is currently a widely used communication interface in data acquisition and control
applications where multiple nodes communicate with each other.
Figure 44. Device / RS485
RS485 Setting: Set the RS485 communication parameters for external PTZ device.
Use: Predefined for PTZ.
Baudrate: Selects one of the Baudrate. The default value is 9600.
Data bits: Selects one of the Data bits. The default value is 8.
Stop bits: Selects one of the Stop bits. The default value is 1.
Parity: Selects one of the Parity bit. The default value is NONE.
- Click the Save button to save the settings, or click the Reset button to clear all of the information
you entered without saving it.
SD Playback (This feature is not available on the VK2-2MPBX)