User manual

73
Device
The device tabs supplies the device setting parameters to communicate with external devices
especially PTZ and RS485.
PTZ
Use the PTZ tab to communicate with external PTZ device. Connect the PTZ device to camera
RS485 port and configure the Protocol and ID.
Figure 43. Device / Device – PTZ
PTZ Setting: Click the Enable PTZ checkbox to enable PTZ function.
Protocol: Selects PTZ protocol to communicate with external PTZ device.
ID: Enter identification number for external PTZ device.
- Click the Save button to save the settings, or click the Reset button to clear all of the information
you entered without saving it.