User manual

69
Event Out – PTZ Preset
The VK2-2MPBX supports several PTZ devices. Connect the PTZ device to RS-485 port using an
appreciate cable.
Figure 39. Event / Event Out – PTZ Preset
PTZ Preset Setting: Click the Enable PTZ preset checkbox to enable the PTZ preset.
When the camera detects an event, you can make a PTZ camera connected to its RS485 port to
move to a predefined preset position. Check the Enable PTZ preset checkbox to enable the
service and return to the Home position once the event has ended.
Home position: Provides total 256 home positions to return after the event finished. Choose
appropriate preset number.
- Click the Save button to save the settings, or click the Reset button to clear all of the information
you entered without saving it.
Event Out – SD Record
This feature is not available on the VK2-2MPBX