User manual

VK2-2MPBX User manual V1.2
66
Event Out – Audio Alert
When the network camera detects an event such as Alarm or Motion, it can output a predefined
audio data to external speaker.
Figure 35. Event / Event Out – Audio Alert.
Audio Alert Setting: To use the audio alert function, an audio data file made by user must
be uploaded from your PC. Provide the path to the file directly, or use the Browse button to
locate it. Then click the Upload button. An audio file for Audio Alert can be made by Audio
Recorder tool in the eVideoClient16 software.
Audio Alert Test: When the setup is complete, the audio output can be tested by clicking the
Test button. To remove an audio file, select index and then click the Remove button.
NOTE
For a proper operation of audio alert function, you must check the Enable audio in the Audio setting
page.
- Click the Save button to save the settings, or click the Reset button to clear all of the information
you entered without saving it.