User manual

VK2-2MPBX User manual V1.2
64
Event Out – FTP & JPEG
Save the JPEG of the activated event to a defined FTP server.
Figure 34. Event / Event Out – FTP & JPEG.
FTP Setting: FTP notification will save a file on the specified FTP server. Click the Enable FTP
checkbox and provide the following information for FTP notification:
Server: Enter the IP address or host name of the target FTP server.
-- Passive Mode: Under normal circumstances the network camera simply requests the
target FTP server to open the data connection. Checking this box issues a PASV command to the
FTP server and establishes a passive FTP connection; whereby the network camera actively initiates
both the FTP control and data connections to the target server. This is normally desirable if there is
a firewall between the network camera and the target FTP server.
Port: Enter the port number used by the FTP server. The Port number can be adjusted in the
range 1-65535. The default setting is 25.
Remote directory: Specify the path to the directory where the uploaded images will be stored.
If this directory does not already exist on the FTP server, there will be an error message when
uploading.