User manual

63
- If a host name is used, a valid DNS server must be specified in the Network -Basic settings.
Port: Enter the SMTP server port numbers for the primary and secondary SMTP servers. The Port
number can be adjusted in the range 1-65535. The default setting is 25.
NOTES
- If your mail server requires authentication, Click the Use (SMTP) authentication checkbox for use
authentication to log in to this server.
- Please consult with your network administrator, if you want to change the port number.
User name: Enter the User name as provided by your network administrator.
Password: Enter the Password as provided by your network administrator.
Login method: Select one for SMTP authentication method allowed.
NOTES
- If a PLAIN or LOGIN mechanism is negotiated, the camera sends user name and password to the
SMTP server.
- The LOGIN mechanism is supported by Microsoft, as well as by some other clients. Most other
clients support the PLAIN authentication mechanism.
- Since the vast majority of Email clients support only PLAIN or LOGIN, mail server administrators
will probably want to consider using STARTTLS to provide an encryption "tunnel" between the client
and server, to protect the user name and password.
Sender: Click in the Sender box and enter the email address as the sender.
Interval: Enter the time for sending an Email after occurring event.
Limit: Set the number of events for sending an Email.
Receiver: Enter the recipient’s email address as the receivers.
NOTE
The Sender email address will be used as the sender for all receivers sent by this camera and the
Receivers listed here will be received same email by this camera. The maximum number of
Receivers is eight.
SMTP (Email) Test: Enter the recipient's email address and click the Test button to test that
the mail servers are functioning and that the email address is valid. When the setup is complete,
the connection can be tested by clicking the Test button.
Receiver: Enter the recipient’s email address as the receiver to test.
NOTE
- Consult with your network administrator for more information on configuring email notification on
your local network.
- Click the Save button to save the settings, or click the Reset button to clear all of the information
you entered without saving it.