User manual

37
-- Auto without DC-IRIS: Automatically sets the amount of light detected by the AGC.
-- Off: Disable the function of auto exposure.
-- Manual Gain: Increase the analog gain manually.
-- Manual Shutter: Adjust the electronic shutter manually.
-- Manual Gain&Shutter: Set the analog gain and electronic shutter simultaneously.
Exposure sensitivity: Indicates the sense degree for the amount of light. The exposure
sensitivity can be adjusted in the range 0-14. A higher value means more sensitive. The default
setting is 10.
Low Light: Provides the options for good image quality in the low light condition.
-- Off: Keep user setting frame rate.
-- Frame control: Increase or decrease the shutter width and the frame rate depend on
current brightness.
-- Gain control: Increase gain and image noise can be appeared.
Exposure gain: Increasing Exposure gain increases the brightness of image, but it also increases
the amount of noise in the image. The exposure gain can be adjusted in the range 0-10. The
default setting is 5.
Shutter speed: Select the electronic shutter speed. It’s only available when Exposure mode is a
Manual shutter mode. The Shutter speed can be adjusted in the range 1/1000-1/2sec. The default
setting is 1/25sec.
Exposure flickless mode: Provides the options for flickless.
-- 50Hz: Select at 50 Hz environments.
-- 60Hz: Select at 60 Hz environments.
White Balance Control: White Balance Control defines how the camera processes video
images to render true colors in a scene. White balance is especially effective in scenes with
changing lighting conditions or in scene with more than one type of light source.
White balance mode: Provides the options for White Balance. The default setting is Auto.
-- Auto: Automatically delivers the best possible image by adjusting the white balance
based on the colors in the scene.
-- Indoor: Select when the camera is installed at indoor.
-- Outdoor: Select when the camera is installed at outdoor.
-- Manual gain: Enter to the manual gain setting mode.
NOTE
In some installations, use manual white balance to render the most accurate image color possible.
White balance position: Move the white balance position into current color temperature.
A higher value in the Indoor means the blue color increase and a higher value in the Outdoor
means the red color increase. The White balance position can be adjusted in the range 0-127. The
default setting is 64.
White balance R gain: Adjusts the picture output in the red range. The White balance R gain
can be adjusted in the range 0-255, where a higher value produces a higher red image. The default
setting is 127.