User manual

33
Mode: Select the composite video output format. The default setting is NTSC.
Source: Select one of the composite video output sources. The default setting is stream1.
-- Quad: If you select Quad, the composite video output displays the different four video
images on a single video pane based ROI settings.
NOTES
- To be possible Quad function, you need to configure the ROI (Region of Interest) first, which is
supplied you as a video source.
- If the stream1 is set a 1600x1200, the first quad window will be displayed as cropped resolution
max.480x360 at aspect ratio 4:3 or max.544x306 at aspect ratio 16:9.
-- Sequence: If you select Sequence, the composite video output repeats the video
images on a single video pane according to <Sequence Mode Setting>.
<Sequence Mode Setting>
Click the checkbox if you want to assign each stream into Sequence Mode.
Each stream dwell time shows the dwelling time / intervals of each stream when the stream set the
sequence mode.
-- Stream1 Dwell Time: Enter stream1 dwell time. The dwell time can be adjusted in
the range 3-3600 seconds. The default setting is 5 seconds.
-- Stream2 Dwell Time: Enter stream2 dwell time. The dwell time can be adjusted in
the range 3-3600 seconds. The default setting is 5 seconds.
-- Stream3 Dwell Time: Enter stream3 dwell time. The dwell time can be adjusted in
the range 3-3600 seconds. The default setting is 5 seconds.
-- Stream4 Dwell Time: Enter stream4 dwell time. The dwell time can be adjusted in
the range 3-3600 seconds. The default setting is 5 seconds.
-- Quad Dwell Time: Enter quad mode dwell time. The dwell time can be adjusted in
the range 3-3600 seconds. The default setting is 5 seconds.
Enable Easy Focus: Click the Enable Easy Focus checkbox if you want to active the composite
output on Easy Focus mode. The Easy Focus function helps to reduce the installation efforts
especially video image focusing of the camera. If Easy Focus is active, the new popup window will
appears at the right corner of the center pane. From that window you can easily focus the camera.
Dwell time: Enter Easy Focus dwell time. The dwell time can be adjusted in the range 1-60
minutes. The default setting is 5 minutes. If the dwell time is expired, the composite video output
will be back with normal video output mode.
NOTES
- The stream1 is only available stream source in Easy Focus mode.
- While Easy Focus dwell time, the stream1 is only transmitted, the other streams do not transmit.
- Click the Save button to save the settings, or click the Reset button to clear all of the information
you entered without saving it.