User manual

VK2-2MPBX User manual V1.2
26
Image
Use the Image tab to adjust the camera image setting value and orientation.
Figure 12. Basic Configuration / Image
Image Appearance: The image appearance allows you to adjust the camera setting
parameters and change the camera orientation. All of parameters are recommended to be
modifying for good image quality suitable for installation place.
Brightness: The image brightness can be adjusted in the range 0-20, where a higher value
produces a brighter image. The default setting is 6.
Gamma: Adjusts the details in the light and dark areas of the scene. Gamma can be adjusted in
the range 0.2-1.2, where a lower value expose more detail in the light area of the scene and a
higher value expose more detail in the dark area of the scene. The default setting is 0.5.
Contrast: Controls the gradations between the darkness and lightest portions of the scene. The
contrast can be adjusted in the range 1.0-2.0. The default setting is 1.0.
Saturation: Controls how intense or vivid the colors are in a scene. The saturation can be
adjusted in the range 0-16. The default setting is 8.
Sharpness: Controls the clarity of detail in a scene. The sharpness can be adjusted in the range
0-20. The default setting is 12.