User manual

VK2-2MPBX User manual V1.2
24
Network
Use the Network tab to manage basic network settings.
Figure 11. Basic Configuration / Network
IP Address Configuration: The DHCP (Dynamic Host Configuration Protocol) server has
a feature that automatically assigns an IP address to the device if there is a device on the network.
Obtain IP address via DHCP: Select the checkbox if you want to assign the IP address from
DHCP server automatically, and then the remaining setting are read-only text.
Use the following IP address: Select the choice box if you want to assign the IP address
manually.
IP address: The address of the camera connected to the network. Specify a unique IP address
for this network camera.
Subnet mask: The address that determines the IP network that the camera is connected to
(relative to its address). Specify the mask for the subnet the network camera is located on.
Default router: The router that accesses other networks. Specify the IP address of the default
router (Gateway) used for connecting devices attached to different networks and network segments.
DNS Configuration: DNS (Domain Name Service) provides the translation of host names to
IP addresses on your network.