Installation guide

3.5 Setup
This section describes how to configure the VK2-ENCODER, and is intended for
product Administrators, who have unrestricted access to all the Setup tools; and
Operators, who have access to the settings for Basic, Live View, Video & Image,
Audio, Event, and System Configuration.
You can configure the camera by clicking Setup in the top right-hand corner of
the Live View page. Click on this page to access the online help that explains
the setup tools.
When accessing the Camera for the first time, the “Admin Password” dialog
appears. Enter your admin name and password, set by the administrator.
If the password is lost, the video encoder must be reset to the factory default
settings. See Resetting to the Factory Default Settings, on page 62, the User’s
Manual.