User manual

55
• NAT traversal Settings
- Enable - when enabled, the network transmitters attempt to configure port mapping in a
NAT router on your network, using UPnP™. Note that UPnP™ must be enabled in the
VK2-VGAVFD (see System>Network>UPnP).
* automatic setting: The VK2-VGAVFD automatically search for NAT routers on your
network.
* manual setting: Select this option to manually select a NAT router and enter the external
port number for the router in the field provided.
Notes:
- If you attempt to manually enter a port that is already in use, an alert message will be displayed.
- When the port is selected automatically it is displayed in this field. To change this enter a new
port number and click Save.
5) Language
It will be able to select a user language. The type of language it will be able to select is the English,
the French, the German, the Spanish and the Italian.