User manual

15
2.3 Network Connection and IP assignment
The VK2-VGAVFD supports the operation through the network. When a camera is first connected to
the network it has no IP address. So, it is necessary to allocate an IP address to the device with the
“Smart Manager” utility on the CD.
1. Connect the VK2-VGAVFD / device to the network and power up.
2. Start SmartManager utility ( All programs > NautilusClient16 > SmartManager), the main window
will be displayed, after a short while any network devices connected to the network will be
displayed in the list.
3. Select the camera on the list and click right button of the mouse. You can see the pop-up menu
as below.
. Select Assign IP. You cam see a Assign IP window.
Enter the required IP address.