User manual

Audio Alert
When the VK2-540VRD detects an event, it can output a predefined audio data to
external speaker. Check the box to enable the service.
• Audio Alert Setting
To use the audio alert with the VK2-540VRD, an audio data file made by user must be
uploaded from your PC. Provide the path to the file directly, or use the Browse button to
locate it. Then click the Upload button.
An audio file for Audio Alert can be made by Audio Recorder tool in the VIP KIT Client
Software.
• Audio Alert Test
When the setup is complete, the audio output can be tested by clicking the Test button.
To remove an audio file, select index and click the Remove button.
Note: For a proper operation of Audio Alert, you must enable “full duplex” in Audio setting
page.