User manual

• HTTP Server Setting
-. Name - The name of the HTTP event server. Use a descriptive name.
-. URL - The network address to the server and the script that will handle the request.
For example: http://192.168.12.244/cgi-bin/upload.cgi
-. User name/Password - Provide your log-in information.
• HTTP Server Test
When the setup is complete, the connection can be tested by clicking the Test button.
Alarm Out
When the VK2-540VRD detects an event, it can control external equipment connected to
its alarm output port. Check the box to enable and then select either:
-. Enable – When you select “Enable alarm out”, the output will be activated for as long
as the event is active.