User manual

3. Extract each wire through the cable hole, connect BNC cable and communication lines.
4. Unlock torx screws (4x) the dome cover and fix the dome case f irmly with supplied
mounting screws (4x), plastic anchors (4x), O-Rings (4x).
5. Adjust desired focus and scene by turning and moving the hemisphere by hand.
6. Lock the housing cover with torx screws (4x).
• Cable through the electrical box with the dome base
The housing can also be mounted on a 4s or 2s electrical box.
• Using the conduit knockout punched with the dome base
Remove the conduit knockout punched for the cable entry.