User manual

0150-0319A 9 Vista Triplex

CDR/DVD

Moisture: Do not expose the unit to rain or moisture. Moisture can damage the internal components.

Do not install the unit near sources of water.

Chassis: Other equipment may be placed on top of the unit if it weighs less than 35 pounds (16

kilograms).

Handling Hard Disks: The unit has a built-in hard disk (HD). Be sure to observe the following points

carefully when operating, setting up, and servicing the unit.

• Do not subject the unit to shocks or vibration. Shocks and vibration may damage the HD or

cause corruption of the data stored on the unit.

• Do not move the unit while the power is turned on.

• Do not move the unit for 30 seconds after tuning off the power.

• When transporting the unit, pack it securely using the original packing materials.

1.6 Associated Equipment

Associated equipment in a typical security system could contain the following items:

• Two monitors

• Video cameras: Composite video, 1 volt peak-to-peak.

• Alarm input devices: Pressure sensors, motion detectors, etc.

• Alarm output devices: Buzzers, Sirens, Flashing Lights, etc.

• A PC connected via ethernet cable.

For instructions regarding the connection of the associated security equipment in your system, please

consult the instruction manual of the associated equipment.

1.7 The Back Panel

1. Camera Inputs: BNC connector, looping. Auto Terminating.

2. Composite Monitor-A and -B Output: Composite video output with BNC style connector.

3. Power Input: For connecting the power supply.

4. Alarm I/O: For connecting alarm inputs, and alarm output relays.

5. RS232 Port 1: For modem connection and external control of the unit.

6. Aux Port: For connecting the Accessory PCB for Audio inputs and outputs.