User manual

0150-0319A 56 Vista Triplex

CDR/DVD

Current Mode Procedure

1. Press the Telemetry button to enter the telemetry mode.

2. Pan and Tilt the camera to the desired position.

3. Press and release the Function button, then press the Preset button.

4. Press the required Number button to store the preset.

5. Repeat the previous 4 steps for the next preset.

6. When all presets are stored, press the Telemetry button to exit the telemetry mode.

 Main Menu → Telemetry → Select AC/DC

Select the drive type, which matches the power

used by the remote Pan/Tilt head or Dome.

Consult your camera head equipment

documentation or supplier to determine the drive

type.

The default setting for all cameras is DC.

Telemetry Select AC/DC

[CANCEL] [OK]

Camera 01:

Camera 02: DC

Camera 03: DC

Camera 04: DC

Camera 16: DC

3.18 Communications

Use this menu to:

• Configure the baud rates and settings for the RS232 ports.

• Configure the network address for the RS485 network.

• Configure the Ethernet address and networks settings.

• Configure bandwidth and TCP MTU size

 Main Menu → Communications → RS232

Select the Port you wish to configure and press the ENTER button.

Port 2

Port 1