User manual

0150-0319A 44 Vista Triplex
2
CDR/DVD
 Main Menu → Alarms → Link To A Macro
Use this menu to link an alarm input to a macro. If a link is created,
a macro will run each time that alarm is activated.
Alarm: Select the alarm input you would like to link.
Macro: Select the macro number you wish to link to. Leave this
setting blank if you do not wish to link to a macro.
Rotate the Jog to navigate, and the Shuttle to change
the values.
Save changes and exit the menu: Select [OK], then press the
Enter button.
Exit the menu without making changes: Press the Menu
button, or select [CANCEL], then press the Enter button.
 Switching Alarm Screen
Use this menu to configure how the unit displays alarms. By default, the Vista Triplex
2
CDR/DVD
switches to a full screen display of the camera or cameras in alarm. Select NO in this menu to disable the
full screen alarm display. The alarm will still be recorded but will not change the current display mode.
 Main Menu → Alarms → Buzzer Setup
Use this menu to configure the internal buzzer.
Global Buzzer: The Global Buzzer setting acts as a master On/Off
switch. Setting the Global Buzzer to OFF deactivates all buzzer
activity.
 Main Menu → Alarms → Notification
Use this menu to select Email Alarm Notification.
Buzzer Setup
[CANCEL] [OK]
Global Buzzer : ON
Email