User manual

0150-0319A 42 Vista Triplex
2
CDR/DVD
 Main Menu → Record → Record Lock
Use this menu to set the Record Lock feature. This feature disables the front panel
record button. Setting Record Lock to ON will start the unit recording if it is not currently
in the Record mode.
 Main Menu → Record → ADM (Auto Delete Mode)
The ADM feature prevents the unit from displaying or archiving any search results that are older than a
specified number of days. This feature may be required by law in some jurisdictions. If required by local
authorities, the ADM feature must be turned On by selecting between 1 and 99 days. Typically this
feature is turned Off.
ADM will change. Are you sure?
Message
ADM Setting
99 Days
Y
es
3.10 Alarms
Use this menu to configure the alarm handling features of the unit.
Caution! The Vista Triplex
2
CDR/DVD’s primary function is to
furnish video multiplexing and recording with a multiscreen
display. Although the unit has alarm handling and motion
detection functions, these are considered secondary features.
This unit should not be the only alarm device on site.
 Main Menu → Alarms → Input Configuration
Configure the alarm inputs as either Normally Open or Normally Closed.
Configure inputs as follows.
Normally Open Zero Potential Relay Contact: Configure in menu as
Normally Open.
Normally Closed Zero Potential Relay Contact: Configure in menu
as Normally Closed
TTL Active High: Configure in menu as Normally Closed.
TTL Active Low: Configure in menu as Normally Open.
Open Collector Active On: Configure in menu as Normally Open.
Open Collector Active Off: Configure in menu as Normally Closed.
ON
OFF