User manual

0150-0319A 41 Vista Triplex
2
CDR/DVD
Test Frequency in hours: From 0 to 1000 hours between tests.
Test Duration: This option is for the type of test to run; Fast or Thorough. The Thorough test will
test significantly more sectors than the Fast test. Norbain recommends using the Thorough test. The
Fast test can miss some disk failures.
Disk Test Setup
Disk Test Result: Disk Failed
Disk 1: Write Error
Disk 2: Write Error
Disk Test:
Test Frequency in hours: 0
Test Duration: Fast
DISABLE
[CANCEL] [OK]
Use the Jog to move between the menu fields and the Shuttle for the selections within the fields.
When satisfied with the selections select OK and press the Enter button to execute.
The Disk Test will run in the background and will not interfere with normal operations. Once the disk
test is done, a message will appear on the screen indicating the test result.
Disk Test Result
D
isk Test Result
[OK] [OK]
Disk Test Success
Disk Failure
D
isk 1:Write Error
D
isk 2:Write Error
PASSED FAILED
Press the Enter button to clear from the display.
Should a disk test fail, several actions will performed:
• An icon will be displayed indicating disk failure.
It is displayed on Monitor A on the bottom of the
screen in the middle. This icon will only disappear when the disk is replaced.
• If the Notify Alarm or Notify Record email option is enabled in the Email Notification Setup Screen,
an email will be sent indicating that a disk failure occurred.