User manual

0150-0319A 20 Vista Triplex
2
CDR/DVD
Searching Recorded Data
The Vista Triplex
2
CDR/DVD has a powerful search interface feature that allows
the user to search for data on the internal hard disk. The user may search the
data for previous recording sessions, text insertion, and alarm conditions.
Because the search interface is so dynamic, the search interface is covered in
detail in a separate section of this manual. See section
5.
Search Button
2.5 Recording
By default, when the unit is powered up it starts recording and record lock is on.
To begin recording, press the Record button. Recording will be indicated by the
LED located directly above the Record button. The unit always starts recording
at the end of previously recorded data. The unit will continue recording until the
record button is pressed again, unless Record Lock is ON.
Record Button
The Vista Triplex
2
CDR/DVD also remembers its current record mode in the event of power loss. If the
unit was recording during a power loss, then when power is restored the unit will put itself back in that
mode.
Monitor Displays During Recording
Multiscreen Live and Playback displays on Monitor A and Monitor B are not affected by recording
operations.
LIVE
PLAY
BACK
PLAY
BACK
LIVE
LIVE
LIVE
LIVE
M
on
it
or
A
M
on
it
or
B
Stop Mode
Playback Mode
Triplex Mode