Specifications

OUTPUT RELAYS WORKSHEET FOR FIELDS *80, and *81.
Applicable only if relays are to be used.
Fiii in required data and foiiow detaiied programming procedure
described in PROGRAWWW
DATA FIELDS section of installation instructions
*8 O OUTPUT RELAYS
Notes: 1.
Field ●25 must be programmed for a 4204 (Relays 01 to 04).
2. Tampers of contacts or expansion unit cannot be used to operate relays.
START
STOP
● either or both~
h either or both+
\
RELAY ZONE
ZONE TYPE
“RESTORE of”
OUTPUT
ZONE TYPE
ACTION EVENT LIST
ISYST OP’N
ZONE LIST ISYST OP’ N
RELAY
01
h b; & 6 &
02
•1
❑ 0 ❑o •1 In
03
❑ ❑ n In ❑ ❑l
04
❑ ❑ n ❑l
❑ ❑o
Where: A =
RELAY ACTION O= No Response;1 = Closefor2 eeq 2. Closeand stayclosed;3 = Pulseon and off
EV = EVENT O= Notused;1 = Alarm;2 = Fault 3 = Trouble
ZL =
ZONE LIST
1,2,
or3 (fromField●81) or O= NotUsed.
~ZONE
LIST:
Uponalarm,fault,or troubleofANY zone on thislist,relayactionwillSTART.
~“RESTOREof”ZONE LIST
Uponrestoreof ALLzones onthislist,relayactionwillSTOP.
It need notbe same listse usedfor START.
ZT = ZONE TYPE/SYSTEM OPERATION
Choices for Zone
TYpee are:
n
oo=Notueed
06= 24 Hrsilent
01 = Entry/Exit 07= 24 HrAudible
03= Perimeter 06=24 HrAux
=’
fault,or troublewillactuate relay:
04= InterforFollower 09= Fire
05= TroubleDay/AlarmNight 10= Interiorw/Delay
Choices for
System Oparation ara:
20=
Arming-Stay 33= AnyBurglaryAlarm
36= Chime
21. Arming-Away
34= Code+ #+7 KeyEntry 39= Anyfire Alarm
22= Disarming(Code+ OFF)
35= Cocfe+#+8Key Entry 40. Bypassing
31. Endof ExiiTime
36. At BellTimeout** 41 = AC PowerFailure
32= Startof EntryTime 37= 2 timesBellTimeout”*
42= SystemBatteryLow
**Or at Disarming,whicheveroccursearlier,
* 81 ZONE LISTS FOR OUTPUT RELAYS Record desired zone numbers. More or fewer boxes than shown maybe
needed,
since any list may include any or all of system’s zone numbers.
Zone List 1: Started or stopped by zone numbers (enter 00 to end entries).
❑0 III, ❑o ❑ 0, ❑0 ❑0 ❑0, ❑0, ❑n, ❑n etc.
Zone
List 2 Started or stopped by zone numbers (enter 00 to end entries).
❑ 0 ❑ n, III* ❑ n, ❑0$ ❑o ❑0 ❑ 0, ❑0$ III etc.
Zone List 3: Started or stopped by zone numbers (enter 00 to end entries).
❑0 ❑ 0 ❑0 ❑ o ❑0s ❑0 ❑0, ❑0 ❑ n ❑0 etc.
-d-