Specifications

Report Code Formats
The Report Codes for Alarm, System Status, and Restore for
Zones shown in program fields *56-*75 can be selected in field *46
to report to the central station in any of the following formats:
Note: If OUTPUT TO LONG RANGE RADIO (field *27) is enabled, all dialer and _
long range radio reports will be sent in Contact ID format (see next page),
regardless of the selection made in field
●46.
The 3+1 and 4+1 Standard formats comprise
a 3 (or 4) digit subscriber
number and
a single digit report code (e.g. Alarm, Trouble, Restore, Open,
Close).
The 3+1 and 4+1 Expanded formats comprise a 3 (or 4) digit subscriber
number, and a single digit report code, followed
by a second line where the report
code is repeated 3 (or 4) times and followed by another number (normally the
zone number) or user ID related to that report.
The 4+2 formats comprise either a 4 digit subscriber number and two digit
report code, or a 4 digit subscriber number and single digit report code,
immediately followed by tfie zone number (normally) or use~ ID. -
3+1,
3+1,
4+1
4+1
Report
Standard Expanded 4+2
Alarm
SSS(S) A
SSS(S) A
Ssss Az
AAA(A) Z
Trouble SSS(S) T
SSS(S) T SSSS Tt
-rI-r(T) t
Bypass
SSS(S) B
SSS(S) B SSSS Bb
BBB(B) b
AC Loss
SSS(S) E
SSS(S) E SSSS EAc
EEE(E) Ac
Low Batt
SSS(S) L SSS(S) L SSSS LLB
LLL(L) L6
Open
Sss(s) o
Sss(s) o
Ssss Ou
000(0)u
Close Sss(s)c
Sss(s)c Ssss Cu
ccc(c)u
Test
SSS(S) G
SSS(S) G SSSS Gg
;::~Gg
Restore SSS(S) R
SSSS RZ
Alarm RRR(R) Z
AC Restore
SSS(S) RA
SSS(S) RA
SSSSRA ~
RARARA(RA)~
LoBat Res.
SSS(S) RL
SSS(S) RL SSSS RLL6
RLRLRL(RL)LB
Trouble Res.
SSS(S) Rl- SSS(S) RT
SSSS RTt
RTRTRT (RT)t
Bypass Res. SSS(S) RB
SSS(S) RB
SSSS RBb
RBRBRB (RB)b
!mem
SSS
or
SSSS = Subscriber ID
C= Close Code-1st Digit
A= Alarm Code-lst digit U= User Number (1st & 2nd digits)
Z= Typically Zone Number*-2nd digit Gg = Test Code (lst & 2nd digits)
Tt = Trouble Code (Ist & 2nd digits) R= Restore Code (Alarm) 1st & 2nd digits
Bb = Bypass Code (1st& 2nd digits) RTt = Restore Code (Trbl)l st & 2nd digits
EAc = AC Loss Code (lst & 2nd digits)
R6 b = Restore Code (Byps)l st & 2nd digits
LLB =
Low Battery Code(l st & 2nd digits) RAAC = Restore Code (AC)l st & 2nd digits
O = Open Code-1st Digit
RL L B = Restore Code (Bat)lst & 2nd digits
‘Zone numbers fon [x]&[#], or [B] = 7 [1]+ [x], or [A ] = 95
Duress = 8 [3] + [#], or [C] =96
Tamper = 9
(continued)
–30-