User manual

84
Quantum Plus installation and user manual
NTP Setup
Select City
NTP setup allows the DVR to have its internal
clock synchronised with an External clock.
The default setting is “Off”
To set up hover on the “Off” a drop down arrow
will appear giving the option to turn “On”.
Once “On”, two other options will appear:
Type allows selection between:
Default – Time server is “time.bora.net”.
Domain – Where another time server name
can be added.
IP – Where an IP address for a time server can
be input.
Once the NTP settings have been set, you
must then tell the DVR which time zone you
are in. This will allow it to offset any time
differences if the time server you contact is in
a different zone.
Select City, the map screen will appear.
Hover over the city selection box, a drop
down arrow will appear, click on the arrow. A
list of time zones will be displayed. Select the
time zone where the Quantum is located.
The Click OK.