User manual

33
Quantum Plus installation and user manual
Video Type
Video Type can set in this menu without rebooting or initialisation. The default is PAL, NTSC
can also be selected
System ID
The remote control can be used to control up to 16 Quantum‟s, the ID number on each can
be set to a unique address so that the remote will only control one at a time if they are in
close proximity. The default is 11.
Use the right arrow to select then the up and down arrow to change the ID number.
To select a unit on the remote control press the ID button, followed by the number, followed
by the ID button again. The LED will flash slowly.