User manual

27
Quantum Plus installation and user manual
The detection area is divided into a grid of 11x8 cells. Default is all cells in active mode.
Use the Left right up down to move cursor and the Select key to toggle between active and
inactive.
The mouse can also be used to select cells and toggle them on and off.
Double clicking on one of the 4 dots in the corner of the selected cell, will toggle between all
cells being active or inactive.
Care must be taken in setting of the motion sensitivity. It is recommended that each level is
testing to find out which one suits that particular camera site. The motion detection is not
recommended for external cameras.
Schedule
The schedule allows the Quantum DVR to be set to only record at particular times of the day.
This timing setting is global for all channels. However the Resolution, Images per second and
Audio can be configured per channel.
To set the timetable select the large SET box on the right of the menu page, the following
page will appear. It allows each hour within the week to be set to be either Active (Orange) or
Inactive (Grey)