User manual

Vista QPlus H.264 V2.2 (RP03)

Quantum Plus H.264 installation and user manual

specified range of time.

SEND TEST MAIL sends a test E-mail to the addresses so allowing the installer to verify if

the setup is correct.

5-2. SMTP Mode

The SMTP (Simple Mail Transfer Protocol) function allows e-mails to be sent over a LAN

The default is SMTP Mode “OFF”. In this mode the DVR will operate using its internal mail

server. Therefore no user / installer setup is necessary.

If it is necessary to use a particular (non default) SMTP mail server, then set the SMTP to

either IP or Domain, dependant on information supplied by your IT manager.

Then, enter ID, Password, IP address, and port.

Finally press “SMTP Status Check” to test.

Please see the screen shots that follow: