User manual

43
Vista QPlus H.264 V2.2 (RP03)
Quantum Plus H.264 installation and user manual
2-7. Duration
The Duration mode allows the user to set the number of days that they require to record for.
The resolution; whether cameras are active or not and whether audio is being recorded can
each be set per channel. The user then sets the number of days of recording required, then
the Quantum will automatically calculate best record rate to achieve these settings
Once a single camera has had its parameters set, these can be copied to selected cameras
by selecting the “Copy Camera Setting” button, the following window will be displayed:
Select the source camera and the cameras required to have the same settings then select
OK