User manual

42
Vista QPlus H.264 V2.2 (RP03)
Quantum Plus H.264 installation and user manual
2-6. Audio Event
16 Audio Inputs and 1 Output are available. Recording can be triggered when Audio is
detected. As with Normal and Alarm recording the Resolution, Images per second can be set
per channel. Individual channels can be enabled or disabled and the sensitivity set to either
Low, Middle or High.
Once a single camera has had its parameters set, these can be copied to selected cameras
by selecting the “Copy Camera Setting” button, the following window will be displayed:
Select the source camera and the cameras required to have the same settings then select
OK