User manual

34
Vista QPlus H.264 V2.2 (RP03)
Quantum Plus H.264 installation and user manual
2-2. Normal (TL) (N1 through to N4)
This configures the continuous recording settings per channel, for scheduling purposes ( see
section 2.5) it is possible to configure 4 different TL modes (N1 through to N4). These are
selected using the left and right arrows at the top of the page.
As default the DVR is set to record N1 (in schedule overview this is denoted by 0.
For each TL mode
Record rates available:
In CIF (360x288), 25 fps is available to each channel (total 400fps).
In 2CIF (720x288), 12.5 fps is available to each channel (Total 200fps).
In D1 (720x576), 6.25 fps is available to each channel (Total 100fps).
Each camera can be individually configured for record rate and Audio on/off.
Once a single camera has had its parameters set, these can be copied to selected cameras
by selecting the “Copy Camera Setting” button, the following window will be displayed:
Select the source camera and the cameras required to have the same settings then select
OK.