User manual

Vista QPlus H.264 V2.2 (RP03)

Quantum Plus H.264 installation and user manual

1-6. Live Setting

Use the Up and Down arrows to select either : Full Screen, Quad or Nine way split

sequences. The display will change to allow individual sequence times to be set per channel

or split screen option. Use the select key to turn the cell green and then the Up and Down

keys to change the values.

Use the right button to move to “Start” press select, the main monitor out put will display this

sequence.

Alternatively use the mouse to select the sequence required then select the duration.

Click “Start” to turn the sequence on. To interrupt the sequence, simply select any camera.

1-7. Camera Status

APPLY: In order to save any modified setting value, press “SEL” key when the

“APPLY” section is highlighted. This action can be carried out within each Sub Menu.

The live settings are used to set up

a sequence of either full screen

camera images or multi screen

displays

Select which cameras will be

connected. Any cameras not

connected will not be able to have

any record rates set against them in

the Record set up tables.