User`s manual

12
Chapter 5: Hardware Installation
SD MEMORY INSTALLATION
① Format SD card
Insert the SD card into SD card slot on your PC and format it
in FAT32.
※ In case there is no card slot on your PC, use an external
SD card reader.
② Insert SD card into SD slot
on MiniD400
After formatting, take the SD card from your PC and insert it
into the MiniD400’s SD slot.
③ Backup recorded files in SD card
When full, the SD card the recorded files can be backed up
in your PC. Insert the SD card in your PC and move the files
from the SD card to the HDD of our PC. You can also check
each recorded file through MiniD Player.

V
ista recommends SanDisk SD cards; these have been tested with MiniD400.
V
ista does not guarantee
compatibility with other makes.
The SD card brands that Vista can recommend are as follows;
- SanDisk
- SDHC: Sandisk 8GB
Attention
Do not take out the SD card or turn off MiniD400 while it is in record mode. It may damage SD card.
When in record mode, turn off SD power by first pressing recording button for 3 seconds and then take
the SD card out.