User manual

0150-0201C 75 Vista Columbus System Triplex
12.
Press the AUTOPAN
button on the unit.
The telemetry receiver
should respond by
activating the AutoPan
funtion.
Verify the operation on the
monitor.
13.
Press the AUTOPAN
button on the unit
again.
The telemetry receiver
should respond by
halting the AutoPan
function.
Verify the operation on the
monitor.
Autopan limits are programmed by the Installer and can not be adjusted by the
Operator.
Using presets
Command the camera to proceed to any preset as follows:
1.
Press any camera
number button to
select a camera to be
controlled
The Monitor should now
be displaying the selected
camera.
2.
Press the
TELEMETRY button
on the unit.
The LED below the
button illuminates.
The Monitor displays a
flashing TEL indicator
3.
Press the PRESET
button on the unit.
4.
Press the number of
the preset desired.
The unit should move
to that preset.
Verify the movement on
the monitor.
NOTE