User manual

0150-0201C 73 Vista Columbus System Triplex
6 Telemetry Controls
6.1 The Telemetry Buttons
T
1
2
3
4
5
6
7
910 8
Common Equipment Controls
BUTTON FUNCTION
CAMERAs
Used to select full screen displays of cameras. Also used with the
FUNCTION button, and TELEMETRY button.
ARROWs
Used in MENUs, and for pan and tilt in 2X Zoom. Also used with
telemetry for camera control of pan/tilt/zoom functions.
Telemetry Controls
BUTTON FUNCTION
1. TELEMETRY
ON / OFF. Must be ON to use telemetry buttons. Telemetry operates on
currently selected camera only. Indicator: LED below button.
2. CAMERA POWER
ON / OFF. Telemetry button must be ON to use. Toggles power state of
currently selected camera only. Indicator: LED above button.
3. CAMERA LAMPS
ON / OFF. Telemetry button must be ON to use. Toggles power to the
lamps of currently selected camera only. Indicator: LED above button.
4. WASHER
ON / OFF. Telemetry button must be ON to use. Toggles power to the
washer of currently selected camera only. Indicator: LED above button.
5. WIPER
ON / OFF. Telemetry button must be ON to use. Toggles power to the
wiper of currently selected camera only. Indicator: LED above button.
6. AUTOPAN
ON / OFF. Telemetry button must be ON to use. Toggles the AutoPan
state of currently selected camera only. Indicator: LED above button.
7. PRESET
Used to set and recall presets. Presets are programmed by the Installer.
8. ZOOM
(Motorised)
Zooms motorised camera lens in or out.
9. IRIS
Used to open and close a motorised iris.