User manual

0150-0201C 51 Vista Columbus System Triplex
Titles Display
Camera titles may be displayed on either monitor. Use this menu
to turn this feature On or Off.
Use the Arrow Button to navigate, and change the values.
Edit Titles
Use the Arrow Button to select the camera whose title you wish to configure, and then press the Enter
button. The Camera Title Edit menu will appear.
Camera Title Edit
SEQ key selects character bank
‘1’ key inserts blank character
‘2’ key inserts selected character
@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^
Camera
Title : Camera 01
1
[CANCEL] [OK]
Camera Title Edit Menu
1. With the camera title selected, press the Enter button. The menu will enter the Edit mode and the
character bank will appear in the centre of the menu.
2. Press the Sequence button to select the desired character set.
3. Use the Left/Right arrows to navigate the cursor in the camera title.
4. Use the Up/Down arrows to navigate the cursor in the character bank.
5. Press the Number 1 button to insert a blank character or press the Number 2 button to insert the
selected character.
6. When finished editing the title, press the Enter button to exit the edit mode.
7. Save changes and exit the menu: Select [OK], then press the Enter button.
8. Exit the menu without making changes: Press the Menu button, or select [CANCEL], then press
the Enter button.
q Main Menu → Camera Setup → AGC
Use the Automatic Gain Control (AGC) to adjust the video input
signal level for cameras whose level is outside the normal range.
The default gain setting is 100%.
Use the Arrow Button to navigate, and change the values.
Save changes and exit the menu: Select [OK], then press the
Enter button.
Titles Display
[CANCEL] [OK]
Monitor A:
Monitor B: OFF
ON
Signal Gain Setup
[CANCEL] [OK]
Camera 01
Signal Gain 100%