User manual

0150-0201C 34 Vista Columbus System Triplex
3.10 Record
Use this menu to:
• Specify the record quality: High, Medium, or Standard.
• Specify if a camera is to be used for event recording,
time-lapse recording, or both.
• Specify the time-lapse record rate per camera.
• Specify the event record rate per camera.
• Specify the activity record rate per camera.
• Specify the alarm record rate.
• Set the Record Lock feature.
• Perform disk maintenance by Deleting, Un-deleting, or
Destroying previously recorded video.
• Specify how the unit will handle data overwrite issues
once the hard disk becomes full.
q Main Menu → Record → Record Timer
Use this menu to setup Preset Record Timer Events.
1. Use the Left/Right arrows to select a timed event from
the list.
2. Press the ENTER button to enter the Edit mode.
3. Use the Up/Down arrows to change the values of the
selected field.
4. Press the Enter button to exit the Edit mode.
5. Use the Up/Down arrows to highlight the [OK] field and
press the ENTER button to save the changes.
q Main Menu → Record → Record Quality
Use this menu to specify the record quality for each camera.
Decreasing the record quality decreases the amount of disk space
required to store the images, due to a higher compression
scheme.
Record Quality Picture Quality Disk Space Needed
High Excellent Most
Medium Good Medium
Standard Fair Least
1. Use the Arrow Button to navigate, and change the values.
2. To save changes and exit the menu: Select [OK], then press
the Enter button.
Day Start Stop Macro ON/OFF
22:59 01:59 NONE ON
MON-FRI 05:56 04:06 10 ON
-- --:-- --:-- -- --
7
[OK]
Hit ‘ENTER’ to toggle EDIT Mode
Record Quality
[CANCEL] [OK]
Camera 01:
Camera 02: High
Camera 03: High
Camera 04: High
:
:
Camera 16: High
High
Record Quality
Event Settings
Timelapse Record Rate
Event Record Rate
Activity Record Rate
Alarm Record Rate
Record Mode
Disk Maintenance
Record Lock
Auto Delete Mode
Record Timer