User manual

0150-0201C 28 Vista Columbus System Triplex

Full Screen Display

Select any camera for Full Screen display by pressing the Number button of

the desired camera. Pressing the Camera number button again displays the

Status Display Box. Pressing the same button a third time displays any

associated ATM or cash register ASCII text.

Number Button

Sequenced Full Screen Display

While in a Full Screen display, press the Sequence button to begin full

screen sequencing. The sequence list and dwell times are programmable.

For detailed information about programming the sequence list see section

2.8. For detailed information about configuring the dwell times in the menu

system, see section 3.9.

Sequence Button

Zooming

To activate the 2x digital zoom, select the full screen display of the camera

you wish to zoom, then press the Zoom button. Zooming will be indicated by

the LED located directly above the Zoom button. Zooming is also indicated

as ZOOM on the monitor. Zooming works with frozen and non-frozen

images. Zoomed images can also be frozen.

While Zoomed, use the Arrow Buttons to Pan and Tilt across the image.

Please note, the camera does not move during digital Pan/Tilt.

Press the Zoom button again, or another camera button to cancel the Zoom

operations.

Zoom Button

with LED

If the Zoom button is pressed while in a multiscreen display, the camera from the last active

cameo is selected for full screen display. Press the Zoom button again to activate the Zoom

operation.

2.11 The Print Image Feature

Pressing the Function and Zoom button will print the currently displayed

image. If any multiscreen is the display mode, the Triplex will switch to a

single image display of the last selected fullscreen camera, freeze the image,

and send to the default printer.

Zoom and Function

Button

Printer Setup

The following equipment and conditions are required for the operation of the Print Image feature.

Equipment

HP DeskJet 3820

Hawking Print Server PN7127P

Conditions

The Printer and Print Server must be connected to the same local network as the Triplex.

The Triplex must be aware of the Print Server’s IP address. The IP address can be input under Main

Menu – Communications – Ethernet – Ethernet Settings (See Section 3.18).

The Printer and Print Server must be On-line and Operational.

NOTE