User manual

0150-0201C 20 Vista Columbus System Triplex

Zooming

To activate the 2x digital zoom, select the full screen display of the camera

you wish to zoom, then press the Zoom button. Zooming will be indicated by

the LED located directly above the Zoom button. Zooming is also indicated

as ZOOM on the monitor. Zooming works with frozen and non-frozen

images. Zoomed images can also be frozen.

While Zoomed, use the Arrow Button to Pan and Tilt across the image.

Please note, the camera does not move during digital Pan/Tilt.

Press the Zoom button again, or another camera button to cancel the Zoom

operations.

Zoom Button

with LED

If the Zoom button is pressed while in a multiscreen display, the camera from the last active

cameo is selected for full screen display. Press the Zoom button again to activate the Zoom

operation.

Searching Recorded Data

The Columbus System Triplex has a powerful search interface feature that allows the user to search

for data on the internal hard disk or an external archive device. The user may search the data for

previous recording sessions, text insertion, alarm conditions, or for motion in a selectable area of the

scene. Because the search interface is so dynamic, it is covered in detail in a separate section of this

manual. See section 5.

2.5 Recording

To begin recording, press the Record button. Recording will be indicated by the

LED located directly above the Record button. The unit always starts recording

at the end of previously recorded data.

The unit will continue recording until the record button is pressed again.

Record Button

If Record Lock is active the Record button will not stop the unit from recording.

NOTE