User manual

0150-0201C 13 Vista Columbus System Triplex

RJ-45 Pin Configuration For Ethernet Port

Pin Use

1 TX+ 5 Not Connected

2 TX- 6 RX-

3 RX+ 7 Not Connected

4 Not Connected 8 Not Connected

82 3 4 5 6 71

RJ-45 socket on

back panel.

SCSI Port

Connector: 50 Pin, High Density SCSI-2.

Gender (on unit): Female

Compatible devices: VAIDe, RAID, DAT, AIT,

CD-R, CD-RW

SCSI ID: 0

The unit is equipped with a SCSI port for

connecting external archive devices. The unit only

supports a single SCSI device. The SCSI ID of the

archive device must be set to 0.

The SCSI bus must be terminated, otherwise the

system will not operate properly.

Additional menu setup may be necessary to

configure archive device. See section 3.15.

RS232 Port 1

For a Modem connection or remote control of unit. See section 3.18 for information about configuring

the modem settings in the menu system. See section 8 for RS232 Remote Control Protocols.

DB-9 Pin Configuration For Port 1

Pin Use

1 DCD 4 DTR 7 RTS

2 RX 5 Ground 8 CTS

3 TX 6 Not Connected 9 Not Connected

DB-9 on back panel.

RS232 Port 2

For Event Generation, ASCII Text Insertion, and proprietary dome control.

RJ-45 Pin Configuration For RS232 Port 2

Pin Use

1 Ground 5 TXD

2 Reserved 6 Not Connected

3 Not Connected 7 Ground

4 RXD 8 Reserved

82 3 4 5 6 71

RJ-45 socket on

back panel.