User manual

0150-0296A 56 Vista Columbus Triplex CDR
Print Server: Enter the Print Servers IP address to enable the Print Image operation (Function and
Zoom).
TCP MTU Size: Select from Standard, 1400, and 1200. The MTU describes the maximum possible TCP
packet size. Standard (1500) is optimal for most ethernet network environments.
HTTP Port : Select the HTTP Port. Select from Port 0 to 65535. Shortcuts are available for port 80
(Camera 1 button) and 8080 (camera 2 button). Consult with a qualified Network Administrator or an MIS
professional to configure these settings.
In order to use Dynamic DNS with GnuDIP, the user has to configure following in the menus:
• Name Service must be set to GnuDIP (Ethernet Setting Menu).
• Primary Name Server must be set to the IP address of the GnuDIP server (Ethernet
Setting Menu).
• Hostname must be set to the required hostname format e.g.
norbain04.companyname.net. For registration purposes, the string preceding the first
dot is used as hostname (here: norbain04), the remainder is used as domain (here:
companyname.net). The hostname is set via the Ethernet Setting menu and is case
sensitive.
• DDNS update interval must be set to a reasonable value (e.g. 2 minutes).
• The password for the DDNS server has to be set in the Passwords->DDNS password
menu. The password is 3 digits long (The Enter button can be used for the number 0).
When everything is configured correctly, the Vista Columbus Triplex CDR will periodically send
a Dynamic DNS update message over TCP port 3495 to the Dynamic DNS server telling the
server its hostname. The Vista Columbus Triplex CDR does not include its IP address in the
message. Instead the Dynamic DNS server extracts the IP address of the Vista Columbus
Triplex CDR via the Ethernet source IP address. This guarantees that the correct IP address is
used even when the Vista Columbus Triplex CDR is behind a NAT router.
3.19 Front Panel Lock
Use this feature to lock the front panel keypad. While locked,
the only operational key on the front panel is the Menu button.
To unlock the front panel, enter the Installer password and return
to this menu.
Highlight the item you wish to select.
Save changes and exit the menu: Press the Enter button.
Exit the menu without making changes: Press the Menu button.
Unlock Keyboard
Lock Keyboard
NOTE