User manual

0150-0296A 53 Vista Columbus Triplex CDR
Current Mode Procedure
1. Press the Telemetry button to enter the telemetry mode.
2. Pan and Tilt the camera to the desired position.
3. Press and release the Function button, then press the Preset button.
4. Press the required Number button to store the preset.
5. Repeat the previous 4 steps for the next preset.
6. When all presets are stored, press the Telemetry button to exit the telemetry mode.
q Main Menu → Telemetry → Select AC/DC
Select the drive type, which matches the power
used by the remote Pan/Tilt head or Dome.
Consult your camera head equipment
documentation or supplier to determine the drive
type.
The default setting for all cameras is DC.
Telemetry Select AC/DC
[CANCEL] [OK]
Camera 01:
Camera 02: DC
Camera 03: DC
Camera 04: DC
:
:
Camera 16: DC
DC
3.17 Quick Wave Setup
This feature provides the option of having the QuickWave software
written to any CDs that are created. This allows the CD to be read
on any PC without installing software. Select ON to enable, OFF to
disable.
QuickWave CD Write: ON
QuickWave Setup
[CANCEL] [OK]